Adam Equipment PMB 53 Manual Del Operador página 38

This display shows the test was automatically stopped as stability was
reached in 12:44 minutes. If it had stopped at the end of the time period it
would have TSTOP on the top line and if manually stopped it would have
MSTOP.
At this time the final results are displayed. These results will include elapsed
time of the test and final % result.
Display other data by pressing the [Dspl/] key. To show the initial mass,
final mass and the file name used by the analyzer to store the results in
internal memory.
.
RES00033
START MASS
END MASS
ST0RED
5.670
1.334
g
g
The final values for the results can be printed again to the Serial interface by
pressing the [Print/] key. See section 8.
To return to normal weighing press the [0/T / Esc] key.
36
| P a g e © Adam Equipment Company 2017