Delete Test Settings; Review Test Settings; Store And Recalling Test Settings From Usb Memory - Adam Equipment PMB 53 Manual Del Operador

Press the [Setup/Enter] key to recall PST 07.
The display will show:
The analyzer will then return to normal.
6.4

DELETE TEST SETTINGS

To delete any the test setting select "PST DELETE" then scrolling through the
stored settings using the [Dspl/] or [Test/] arrow keys to find the desired
settings and then pressing the [Setup/Enter] key to delete it.
The display will then show the next test setting stored or if the memory is
empty a message will be shown. Press [0/T / Esc] to return to normal.
6.5

REVIEW TEST SETTINGS

To review the current settings press the [Test/] key then advance through
the settings pressing the [Setup/Enter] key at each option to retain the
current value.
described in section 6.1.
At the beginning of a test the display will preview the current settings if the
user parameter to allow the preview is enabled. See section 10.1.2.
If you need to abort the test before it begins press the [Start] or [0/T /
Esc] key to return to normal.
6.6 STORE
AND
29
| P a g e
BREAD-3
PST 07
RECALL OK
If any setting needs to be changed it can be modified as
RECALLING TEST SETTINGS FROM USB MEMORY
© Adam Equipment Company 2017