Adam Equipment PMB 53 Manual Del Operador página 27

Start Method
The last setting is the Start method. The analyzer will either start a test
automatically whenever the cover is lowered (after a 5 second delay to allow
stability), or manually when the [Start] key is pressed.
Display will show "START"
Options are "Manual" or "Auto"
Print Control
To allow the analyzer to print the results during the test. If the print is set to
ON the analyzer will also store the results to memory using the file name
given by the user. See Section 7.0
Display will show
Options are "On" or "Off"
The display then changes to the format of the print test.
Options are "Complete" or "Summary " test results. See section 11.3
After setting the last parameter press [0/T / Esc] to return to normal
weighing and ready to begin a new test.
25
| P a g e
MANUAL
start
PRINT TEST
0n
FORMAT
C0MP
FORMAT
SUMM
© Adam Equipment Company 2017