Adam Equipment PMB 53 Manual Del Operador página 25

Display "Interval" "Sec XX" The user can change the value using the arrow
keys. Range is 01 to 99 Seconds. Typical results will be computed every 5-
15 seconds.
The next setting is the operation of the Rapid heat Function.
Display will show "Rapid"
OFF
rapid
Options are to set Rapid heat to Off, On or User selectable.
The Rapid heat function is only active for single or step heating. For ramp
heating it is disabled.
The next setting is the End Point Determination or Stop Condition.
Display will show "STOP"
Options are "Time", "Stable" or "Time/Stab"
The next steps will depend upon the option selected.
23
| P a g e
INTERVAL
se[10
ON
rapid
TIME
St0p
USER
rapid
TIME/STAB
St0p
© Adam Equipment Company 2017