Adam Equipment PMB 53 Manual Del Operador página 45

When [Setup/Enter] is pressed and passcodes are not enabled the display
will show the first section of the menus, Serial interface. If passcodes are
enabled, the analyzer will ask for it by displaying:
PASSCODE
000000
With the right digit flashing.
Enter the correct passcode using the numeric entry method.
If a wrong code is entered the analyzer will return to weighing mode
If the passcode has been enabled and entered, the analyzer will allow the
operator to access the Supervisor's menus
The [Dspl/] and [Test/] keys will cycle through the main headings,
pressing the [Setup/Enter] key will enter the heading and sub-parameters or
options can be set. Press [PST/] to come out of a sub-menu and go up
one level or [0/T / Esc] to return to normal weighing from any menu
43
| P a g e © Adam Equipment Company 2017