Adam Equipment PMB 53 Manual Del Operador página 32

To store or recall test settings stored on a USB memory device, simply plug
the device into the USB hub interface. The analyzer will detect the memory
has been inserted and display a screen to guide you.
The display will show a message showing the USB device is inserted:
To select the option
stored in the analyzer memory to the USB memory device press the [Dspl/]
key to change the menu option to select Preset Store, "PST ST".
Press [Setup/Enter] to enter the test saving function.
Once the file has been saved the display will show
For 2 seconds then return to the USB display.
To recall any stored test procedure press the [Dspl/] key to show the test
load screen.
Press the [Setup/Enter] key to enter the test load function. The display will
show the file name of the first test file found.
30
| P a g e
CONFIG LD
USB
PST ST
USB
SUCCESS
USB
PST ST
USB
PST LD
USB
of storing all of the test settings
© Adam Equipment Company 2017