Store Test Settings - Adam Equipment PMB 53 Manual Del Operador

6.2

STORE TEST SETTINGS

It will be possible to store up to 49 test procedures/settings.
factory default that is permanently stored as PST 00. See sec. 6.1
To Store the current settings press the [PST/] key.
the user the option to store, recall or delete a Preset Test. The display will
show "PST STORE" or "PST RECALL" or "PST DELETE". Use the up/down
arrow keys, [Dspl/] and [Test/], to select either store or recall.
If Store is selected the display will then show "PST STORE
number showing the ID for the next empty location. For example if PST 01,
02, & 03 are already stored the next number is PST 04.
to overwrite a previously stored value they can change the number and
continue. Using the up/down arrow keys, [Dspl/] and [Test/].
user has stored positions 1,2, and 4 then when this process begins the first
blank location is PST 03, so that is the value to be displayed. Then the next
time PST 05 would be shown.
Press [Setup/Enter] to select the PST number shown. If this number already
has a test method stored then ask if the test should be overwritten. To
continue the user must press [Setup/Enter] to overwrite the old results and
store new ones.
Pressing
without clearing the old result.
27
| P a g e
PST STORE
PST STORE
05
OVERWRITE?
the [0/T / Esc] key will escape
© Adam Equipment Company 2017
There is also a
The display will give
XX" with the
If the user wishes
If the