Numeric Entry Method - Adam Equipment PMB 53 Manual Del Operador

[PST/]
[Print/]
[Dspl/]
[Setup/Enter]
4.1

NUMERIC ENTRY METHOD

To set a value when required, use the keys as given below-
- [Dspl/] and [Test/] keys to increase or decrease the flashing digit
- [Print/] and [PST/] keys to advance or move back the digit
- [Setup/Enter] key to accept the value
14
| P a g e
Store or Recall pre-stored test
parameters.
Instructs the analyzer to print data
Changes the display to read other
data during a moisture test.
Enters the Setup parameters
(Supervisor Menus)
To advance a flashing digit by
one position to the right.
To go back by one step during
setup functions
To advance a flashing digit by
one position to the left
To increase or change a
displayed value or scroll
through options forward
Enters a function or saves a
value while manually entering
unit weight or check weighing
limits
© Adam Equipment Company 2017