Adam Equipment PMB 53 Manual Del Operador página 56

Once the file has been saved the display will show
For 2 seconds then return to the USB display.
To recall any stored test procedure press the [Dspl/] key to show the
configuration load screen.
Press the [Setup/Enter] key to enter the test load function. The display will
show the file name of the first file found.
To load this file press the [Setup/Enter] key again. Or to choose a different
file press the [Dspl/] key to advance through the other files available.
To continue the USB device should be removed. The analyzer will return to
normal weighing automatically. Or press the [0/T / Esc] key to escape
back to normal weighing.
To store or recall other files, plug the USB memory back into the analyzer.
54
| P a g e
STORE OK
USB
CONFIG LD
USB
CONFIG LD
USB
CONFIG1
USB
CONFIG1
LOAD
© Adam Equipment Company 2017