Safety - Adam Equipment PMB 53 Manual Del Operador

3.6

SAFETY

This PMB Moisture Analyzer complies with the European Council Directives
and international standards for electromagnetic compatibility, and safety
requirements.
Improper use or handling can result in damage or injury.
To prevent damage to the equipment, read these operating instructions
thoroughly. Keep these instructions in a safe place.
For safe and dependable operation please follow these instructions.
 The Moisture Analyzer is used for determination of the moisture in
samples. Do not use it for any other purpose. Improper use is dangerous
and can cause injury or damage to other property.
 The Moisture Analyzer must be operated as described in this manual. The
environment must be controlled so that hazardous materials or conditions
are not present.
 The Moisture Analyzer must be operated only by trained personnel who
are familiar with the properties of the samples used and with the operation
of the instrument. Do not leave the analyzer unattended when running a
test.
 Make sure before getting started that the voltage printed on the rear panel
is identical to your local voltage.
 Your Moisture Analyzer is supplied with a 3-pin power cable with a
grounding conductor. Use cables that meet the safety standards for your
location and include the earth ground conductor.
 DO NOT disconnect the earth ground connection.
 The mains cable should not touch the enclosure where it can be heated
during the test.
 Remove the power cable if the Moisture Analyzer is serviced.
9
| P a g e © Adam Equipment Company 2017