Delete All - Adam Equipment PMB 53 Manual Del Operador

To delete all test results from memory, during normal weighing mode press
the [Dspl/] key until the display shows
When the selection shows DELETE ALL, press [Setup/Enter] to delete all
test results. The display will ask if you are sure you want to delete all results.
Press [Setup/Enter] again. The display will count down from 99 to 0 during
the time it takes to remove all the files.
To delete an individual test result continue as above except press the
[Dspl/] or [Test/] will change the option to DELETE.
When the selection shows DELETE, press [Setup/Enter] and the display will
show the first stored test result using the file name given it when stored.
Press the [Dspl/] or [Test/] key to change the file name to the next
available. When the desired test result is found press the [Setup/Enter] Key
to delete just this file. The display will then show DELETED then the next
available file. Press [Setup/Enter] to delete this file if desired.
Pressing [0/T / Esc] will return the analyzer to normal operation.
39
| P a g e

DELETE ALL

RES00033
© Adam Equipment Company 2017