Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Technical information
5. Technical information
1. Safety precautions
2. Attachment points
en
100
100
1. Safety advice
Observe the regulations, warnings and provisions on health,
safety and environmental protection for all of the work
100
described in this section.
100
2. Attachment points
101
Only use suitable and approved lifting gear (crane) for
unloading the machine, assemblies and components as well
102
as for lifting heavy loads; only use appropriate means of
104
transport for handling the machine internally.
106
Any unloading or internal transportation must not be done by
hand if such involves weights in excess of 25 kg.
106
When using industrial trucks to unload the machine and move
107
it internally, always take into account the machine's total
107
permissible weight (see Technical specifications).
107
107
Danger!
107
Never stand or work under loads suspended on lifting
gear. This presents the risk of fatal injury!
108
Observe the following when using lifting gear:
108
• Only attach lifting gear at the points marked (lifting
108
eyebolts etc.) on the machine / assemblies / components.
108
• Only use appropriate and tested load suspension devices
108
(lifting belts, ropes, chains, shackles etc.) with a sufficient
load carrying capacity.
108
• Only give experienced, skilled personnel the task of
108
attaching the machine / assemblies / components.
109
• Always ensure level standing for machine / assemblies, lift
vertically, never drag at an angle.
109
Protect projecting machine parts and equipment from
109
damage when using lifting gear and moving the machine
109
internally.
109
Set down loads gently with the usual care and take
immediate action to prevent them from falling over /
109
tipping, rolling away, suffering damage from external force,
109
e.g. colliding with industrial trucks and objects falling from
above.
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
