Dismantling / Disposal; General Information Before Dismantling; Taking Out Of Service; Dismantling General Information Dismantling The Machine / System - BlueMax Mini Modular Plus Manual De Instrucciones

Servicing / care

11. Dismantling / disposal

1. General information
Before dismantling

2. Taking out of service

3. Dismantling
General information
Dismantling the machine / system
4. Hazardous substances / disposal
Protecting the environment
Scrapping
Oil and oily wastes
en
144
1. General information
When dismantling the machine, always observe the national
and international laws applicable in the country of use.
144
We can only give basic information on dismantling and
disposing.
144
Observe the regulations, warnings and provisions on health,
144
safety and environmental protection for all work.
145
We recommend instructing an approved dismantling /
145
disposal company to dismantle and dispose of the machine /
system.
145
Before dismantling
145
For decommissioning / dismantling the machine / system, it
145
is important to be familiar with the space that is needed. This
145 includes aspects such as clearance heights, narrow transport
routes and tight spots when the machine is taken away.
145
Space must be available for work equipment or sufficient
space designated for this.
Before commencing work, always inspect the dismantling
area and mark it off with barriers.
Before dismantling, you should familiarise yourself with
the structural stability of the machine / system and with
any weak points it may have, and draw up an appropriate
dismantling plan.
Provide appropriate receptacles and transportation
containers for the various materials.
A carefully devised work and safety plan provides a sound
basis for a well-organised procedure.
2. Taking out of service
When taking the machine out of service, it must be
disconnected from the compressed air supply to dissipate the
residual or stored energy.
Danger from electric shock!
Even after the machine is switched off, cables in the
control cabinets are still live
• Power supply cables
• Control cables to the power switch
• Undervoltage supply
WARNING
Risk of injury
The compressed air supply must be disconnected
by industrial mechanics or by persons of similar
qualification.