Setting Drilling Depth, Vertical Drilling Unit; Drilling With Horizontal Drilling Unit - BlueMax Mini Modular Plus Manual De Instrucciones

Setting up
WARNING
Warning - Hand injuries!
Malfunctioning can result in serious injuries and
disrupt production!
Inserting position for press-in frame
The press-in frame can be repositioned if necessary. Adjust
press-in frame for exact positioning using adjustment
screw . The adjustment screw presses against stop screw
5
. Swing down press-in frame and check position during
6
pressing in. If necessary, repeat the setting process until the
correct position is attained.
en

Setting drilling depth, vertical drilling unit

The stop limits downward drilling-stroke movement.
The drilling stroke can be selected to suit any panel
thickness. Drilling depth can be changed by turning
adjustment screw
1
and check drilling depth using a calliper gauge.

Drilling with horizontal drilling unit

First set the drilling depth using the hand wheel on the
front of the machine.
130
. Afterwards, carry out a trial drilling
5
6
1
1
1