Centre Stop; Continuation Stops - BlueMax Mini Modular Plus Manual De Instrucciones

Centre stop

The centre stop is premounted.
Setting the centre stop
Turning the large metal wheel adjusts the centre stop.
A scale on the centre stop provides guidance in relation to
the distance from the edge.
Please carry out trial drilling.

Continuation stops

The continuation stops are premounted on the
Interchangeable drilling unit, 9 spindles.
Setting the continuation stops
Setting height of the continuation stop
The height of the left and right continuation shop must be
adjusted to suit the panel thickness by means of top setting
ring . The continuation stop's finger should engage as
1
deeply as possible into the drill hole. A space of approx.
3 mm must also be allowed between workpiece and stop
(insert a 3 mm hexagon socket spanner
1
)
2
2
Fig. 15: Centre stop
Fig. 16: Setting centre stop
en
115