Interchangeable Drilling Unit, 6 Spindles, Interchangeable Drilling Unit, 3 Spindles (Selekta 22/9); Interchangeable Drilling Unit, 9 Spindles - BlueMax Mini Modular Plus Manual De Instrucciones

Push pre-mounted tool into tool holder of interchangeable
4
drilling unit and turn in opposite direction of drilling-unit
5
rotation.
The bayonet chuck engages.
Repeat this process until all tools are securely engaged.
Always close off unneeded tool holders with a dummy plug
.
6
Always check your work before fitting the interchangeable
drilling unit.
The drill bits must engage and all screws must be tight.
NOTE
Pay attention to colour marking!
Drill bits marked red must be used for spindles turning
anticlockwise.
Drill bits marked black must be used for spindles turning
clockwise.
Interchangeable drilling unit, 6 spindles /
interchangeable drilling unit, 3 spindles (Selekta 22/9)
These interchangeable drilling units are used for drilling
receiving holes and for inserting hinges and connecting
fittings.
Fit tools (drill bits) on a work bench.

Interchangeable drilling unit, 9 spindles

This interchangeable drilling unit is used for creating hole
lines.
Drilling pattern
Bohrbild
L
L
L
R R
32 32 32 32 32
256
L
L
R
R
32 32 32
4
5
6
Bohrbild
52
3 Spindeln
R
9
L
1
2
3
Drilling
Bohrbild
52
pattern
3 Spindeln
3 spindles
R
9
L
Drilling
Bohrbild
pattern
52
6 Spindeln
6 spindles
L
R
5,5
L
R R
32 32
en
Bohrbild
6 Spindeln
L
R
32
R
127