Drilling; Pressing In - BlueMax Mini Modular Plus Manual De Instrucciones

Operation

Drilling

1. Place workpiece in front of the fence and set the pendulum
stops. Initiate the drilling process using the manually
operated valve or foot switch and terminate it by releasing.
2. The Hettich hinge for fast installation on the cup side can
now be fitted by hand.

Pressing in

1. Clip hinge with premounted sockets into the insertion die
for hinges and press hinge arm in between the retaining
springs.
en
2. Move catch with hinge insertion die down as far as the
stop over the drill hole.
3. Initiate the insertion process by pressing manually
operated valve
Move up the hinge insertion die.
Release hold-down clamp using lower momentary
switch .
2
Remove workpiece.
138
and terminate by releasing.
1
1
2