Operating Principle And Description Of The Machine; Rating Plate; Limit Values; Liability - BlueMax Mini Modular Plus Manual De Instrucciones

• Failing to observe the information and instructions given
in the operating manual in relation to transporting,
storing, assembling, starting, operating, servicing and
setting up this machine
• Unauthorised structural changes
• Unauthorised changes to this machine's drive system
(power output, speed)
• Inadequate monitoring of machine parts subject to
particular wear
• Improperly performed repairs
• Disasters caused by the impact of foreign objects
or Acts of God
The situations above describe some of the residual hazards
which, despite being impermissible, may occur and harm the
health of staff.
The owner must observe the safety requirements defined
in the German Ordinance on Industrial Safety and Health
(Betriebssicherheitsverordnung).

4. Operating principle and description of the machine

The BlueMax Mini Modular Plus is a semi automatic drilling
and insertion machine for panel type workpieces. This
machine must only be used for working on flat panels made
of wood-based materials, such as chipboard, blockboard
panels, MDF, solid wood or similar materials.
All parts being worked on are fed into the machine by hand.
Flat panels made of wood-based materials, such as chipboard,
blockboard panels, MDF and solid wood are laid on the work
table and fixed into place with the clamping equipment. The
drilling process is initiated by pressing the start button / foot
switch (optional). The start button / foot switch (optional)
must remain pressed until the drilling process has been
completed. Using the integrated insertion facility (optional),
the furniture fittings are pressed into place by means of a
manually operated press-in frame (optional). This concludes
the machining process.
Fig. 1: BlueMax Mini Modular Plus
Fig. 2: BlueMax Mini Modular Plus with accessories

5. Rating plate

Note!
The rating plate is located on the machine.
The rating plate shows the following information:
State all of the above details when requesting technical
information and ordering replacement parts.

6. Limit values

The following limit values apply to items of equipment
and accessories, such as drive motors, electric / electronic
operating equipment etc.:
• ambient temperature: 35 °C max.
• rel. air humidity: approx. 65 %
Space required by the machine
The space required for the BlueMax Mini Modular Plus is largely
determined by the dimensions of the machine base frame.
Machine life
The machine's life will depend on whether or not it is used
for its intended purpose, on adherence to regular servicing
intervals and on the regular replacement of expendable parts.

7. Liability

Defects must only be rectified by competent personnel.
Our liability is restricted to damage caused while using
the system in the intended manner. We shall not be liable
for safety defects not yet identifiable on the basis of the
current state of the art.
Failure to observe:
• safety advice for operating personnel
• advice on particular hazards
• the ban on unauthorised modifications and changes
• use replacement and expendable parts or auxiliary materials
approved by the manufacturer will rule out any liability on
our part for the consequences
Manufacturer
Address
Type designation,
machine numbers
Year of manufacture
Technical specifications
(e.g. nominal pressure)
99 99
en