BlueMax Mini Modular Plus Manual De Instrucciones página 117

Restart drilling process and check distance between last
drilling of 1st drilling process and 1st drilling of second
drilling process
7.
The distance can be checked best by inserting two 5 mm
pins into the drillings. For this, you must use a calliper
and measure from the outer edge of the pins
produce a dimension of 37 mm (32 mm distance between the
drillings + 2 times 2.5 mm = 37 mm).
If the dimension differs, the continuation stop must be
readjusted.
For this, undo the screw at the pendulum and tighten or
slacken the grub screw using a hexagon socket spanner
(1 turn = 0.8mm)
9.
. This must
8
8
9
7
7
en
117 117