Top sensitivity:
•
let the counterweight slide towards the equalizer (i.e. towards the middle part of the rod)
•
recommended for low weights.
Lowest sensitivity:
•
let the counterweight slide towards the rod's tip (opposed to the equalizer)
•
recommended for high weights.
After each adjustment tighten the screw again to lock the counterweight.
At this point, if necessary, regulate the equalizer's counterweight (C):
•
Changing the equalizer's counterweight position, and hence the equalizer's sensitivity according to its position,
requires loosening the locking screw.
Top sensitivity:
•
move the counterweight towards the inside;
•
recommended for low weights.
Intermediate sensitivity:
•
put the counterweight in the middle;
•
recommended for intermediate weights.
Lowest sensitivity:
•
move the counterweight towards the outside;
•
recommended for high weights.
After each adjustment tighten the screw again to lock the counterweight.
25