8 TROUBLESHOOTING
Anomaly
The machine does not start
One or more rollers do not turn
The scraper is not in the correct
position
9 INFORMATION ON DISMANTLING AND DISPOSAL
According to Art. 13 of the Leg. Decree No. 151 of 25 July 2005 "Implementation of Directives 2002/95/CE,
2002/96/CE, 2003/108/CE on the restriction to the use certain hazardous substances in electrical and electronic
equipment and also on waste disposal|.
The crossed out wheeled bin symbol on the equipment or its packaging indicates that the product, at the end of its useful life,
must be collected separately from other wastes.
The collection of this apparatus at the end of its technical life is organized and managed by the manufacturer. The user that
intends to dispose off this equipment should, therefore, contact the manufacturer and follow the system he has adopted to
allow separate collection of the equipment that has reached the end of its life.
Proper waste sorting for the subsequent recycling, treatment and environmental disposal of decommissioned equipment
contributes to preventing potentially negative impact on the environment and on human health, encouraging the reuse and/or
recycling of the materials composing the equipment. If the holder of this product disposes it of illegally, this involves the
application of administrative sanctions provided by the laws in force.
Registered at the WEEE National Register under the number: IT08020000000645
Possible cause
No power supply
Fuse inside electronic card is fault
The electronic card is faulty
The start/stop button is faulty
The pedal is faulty
Socket pedal or wire socket pedal are
faulty
The card or button operates but the
motor doesn't start
Belt is faulty
Plastic gear is faulty
Transmission joint is faulty
The scraper spring is faulty
Possible solution
Check the main contactor, the socket, the plug
and the power cable
Replace fuse (5X20 5A F)
Replace card
Replace the button
Replace the pedal
Replace the wire pedal
Replace the motor
Replace the belt
Replace the plastic gear
Replace the transmission joint
Replace the scraper spring
29