Allmand NIGHT-LITE V Serie Manual Del Operario página 33

Engine - Caterpillar C1.1
Specification
Battery Rating
Automatic Low Oil Pressure
Shutdown
Automatic High Water
Temperature Shutdown
Fuel
Required Engine Oil Type
Engine Oil Capacity - with Filter
Required Engine Coolant Type
Coolant System Capacity
Coolant Overflow Reservoir
Capacity
Service Interval - Oil Change &
Filter
Service Interval - Fuel Filter
Service Interval - Air Filter
Note*
Engine - Perkins 403F-11
Specification
Manufactuer
Model
Type
Displacement
Aspiration
Emissions
Power Output - Prime (60 Hz)
Fuel System
Starting Aid
Engine Electrical System
Engine Alternator
Number of Batteries
Battery Size
Battery Type
Battery Rating
Automatic Low Oil Pressure
Shutdown
Automatic High Water
Temperature Shutdown
Imperial Metric
525 CCA @ 0°F (-18°C)
775 CCA @ 0°F (-18°C)
10 PSI 69 kPa
234°F 112°C
North America - diesel fuels that meet
ASTM D975 for Ultra Low Sulfur
Diesel (ULSD) are required. ULSD
has a maximum sulfur content of 15
parts per million (PPM) or 15 mg/
kg. Diesel fuel may be No. 1-D or
No. 2-D. Refer to Engine Operator's
Manual for detailed information.
10W-30 API CK-4 (CJ-4, CI-4, CI-4
Plus) or its equivalents
4.4 US qts 4,2 L
Nitrite Free Extended Life Coolant,
Organic Acid Technology (OAT),
2-EHA Free
4.3 US qts 4,0 L
1.1 US qts 1,0 L
First Oil & Oil Filter Change - 50 hr
All Other Oil & Oil Filter Changes -
1,000 hr*
1,000 hrs
Refer to Engine Op Manual
Engine oil must be checked prior to
operation and refilled if necessary
Imperial Metric
Perkins
403F-11
Liquid-Cooled Three Cylinder Diesel
69 cu in 1.131 L
Naturally aspirated
EPA Tier 4 Final
13.8 Hp @ 1800 10,3 kWm @
rpm 1800 rpm
Indirect Injection
Glow Plugs
12 Volt DC
40 A
1
Group 24
Standard - Lead Acid
Optional - Absorbed Glass Mat
(AGM)
525 CCA @ 0°F (-18°C)
775 CCA @ 0°F (-18°C)
10 PSI 69 kPa
234°F 112°C
Engine - Perkins 403F-11
Specification
Fuel
Required Engine Oil Type
Engine Oil Capacity - with Filter
Coolant System Capacity
Required Engine Coolant Type
Coolant Overflow Reservoir
Capacity
Service Interval - Oil Change &
Filter
Service Interval - Fuel Filter
Service Interval - Air Filter
Note*
Troubleshooting
DANGER
Electrocution Hazard
• Ballast and capacitors are capable of discharging
high voltage.
• High voltage is present when engine is running.
Never attempt to service electrical components while
engine is running.
• Contact with wires made bare by damaged, cut or
worn insulation could result in death or serious injury.
Replace damaged wiring before operating unit.
WARNING
Burn Hazard
• The light fixtures become extremely hot during use.
• Always use caution and heat–resistant glove when
handling the lights or allow the lights to sufficiency
cool down before handling.
Imperial Metric
North America - diesel fuels that meet
ASTM D975 for Ultra Low Sulfur
Diesel (ULSD) are required. ULSD
has a maximum sulfur content of 15
parts per million (PPM) or 15 mg/
kg. Diesel fuel may be No. 1-D or
No. 2-D. Refer to Engine Operator's
Manual for detailed information.
10W-30 API CK-4 (CJ-4, CI-4, CI-4
Plus) or its equivalents
4.4 US qts 4,2 L
4.3 US qts 4,0 L
Nitrite Free Extended Life Coolant,
Organic Acid Technology (OAT),
2-EHA Free
1.1 US qts 1,0 L
First Oil & Oil Filter Change - 50 hr
All Other Oil & Oil Filter Changes -
1,000 hr*
1,000 hrs
Refer to Engine Op Manual
Engine oil must be checked prior to
operation and refilled if necessary
en
English
33