Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1) On-off button: for switching the appliance' on and off.
2) START-STOP button: Starts or ends the selected program cycle, shown on the display (cooking cy-
cle, washing cycle, etc.).
Green light on ((steady light): cooking program in pause status or ready to start.
Green light on (flashing): cooking program in progress.
Green light off: appliance on .
3) Convection cooking key: for selecting convection (fan-assisted hot air) cooking mode.
Green light on: convection cooking mode selected.
4) Mixed cooking button: for selecting mixed cooking mode (convection + steam).
Green light on: mixed cooking mode selected.
5) Steam cooking mode button: for selecting steam cooking mode.
Green light on: convection cooking mode selected.
6) Temperature setting button
– To set the cooking temperature: press once (the
green light flashes) to set the temperature using
the knob (10).
– To modify the temperature during cooking: press
once to display the value of the temperature set on
the display (11).Press the button and turn the knob
(10) to modify the value set.
– Changes the temperature unit of measurement
from degrees Centigrade (°C) to degrees Fahren-
heit (°F) .
With the appliance in the STOP phase (green light
(2) on) press the button (14) and hold it down for
longer than 3 seconds (the whole panel powers
down).
Press and hold the button (6) and turn the knob
(10) to select temperature display in ° C or ° F.
Press the knob (10) to confirm the changes made.
7) Time setting button (Timer)
– To set the cooking time: press once (the green light
flashes) to set the cooking time using the knob
(10). Keep the button pressed for about 2 seconds
to set an "unlimited" cooking time; the display (12)
shows the message "InF", which cannot be modi-
fied.
– To modify the time during cooking: press once to
display the value of the time set on the display
(12). Press the button and turn the knob (10) to
modify the value set.
– Enable or disable the automatic preheating.
With the appliance in the STOP phase (green light
(2) on) press the button and hold it down for long-
er than 3 seconds (the whole panel powers down).
Press and hold the button (7) and turn the knob
(10) to enable or disable the automatic preheating.
Press the button (7) to confirm the changes made.
8) Humidity percentage setting button
– Sets the humidity percentage in mixed cooking mode (convection + steam).
Press button once (the green light flashes) and set the percentage of humidity using the knob (10).
– To modify the percentage of humidity during cooking: press once to display the value of the humidity
on the display (13).
Press the button and turn the knob (10) to modify the value set. Wait about 5 seconds for the new
value set to be saved.
14
DESCRIPTION OF CONTROLS
11
14
15
10
3 4 5
6
REAL
7
8
INJ
18
USE AND OPERATION
2
12
9
13
17
16
3326461_GB_rev.1
Publicidad
