4. Data transmission (Sequencer section)
4.1 Recorded messages are transmitted during
playback.
4.2 If the Through parameter (SEQUENCER/Setup/
SEQ System Setup) is ON, messages received
(except for System Common messages and
System Realtime messages) will be transmitted.
4.3 Messages that are generated and transmitted
4.3.1 Messages automatically generated by the
system
Channel Mode messages
Omni Off (Controller number 124)
status
2nd byte
3rd byte
BnH
7CH
00H
n=MIDI channel number
: 0H - FH (ch.1 - ch.16)
* At start-up, this message is transmitted to all channels.
Poly (Controller number 127)
status
2nd byte
3rd byte
BnH
7FH
00H
n=MIDI channel number
: 0H - FH (ch.1 - ch.16)
* At start-up, this message is transmitted to all channels.
4.3.2 Messages generated and transmitted when
the Sync Output switch is ON
System Common messages
Song Position Pointer
status
2nd byte
3rd byte
F2H
mmH
llH
mm,ll=value: 00 00H - 7F 7FH (0 - 16383)
Song Select
status
2nd byte
F3H
ssH
ss=value
: 0 - 7FH (0 - 127)
System Realtime messages
Timing Clock
status
F8H
Start
status
FAH
Continue
status
FBH
Stop
status
FCH
4.3.3 Messages generated and transmitted when
the MMC Output switch is ON
STOP (MCS)
status
data byte
F0H
7FH, dev, 06H, 01H
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC Command Message
01H
STOP(MCS)
F7H
EOX
(End Of Exclusive)
status
F7H
Capítulo 12. Material suplementario
DEFERRED PLAY (MCS)
status
data byte
F0H
7FH, dev, 06H, 03H
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC Command Message
03H
DEFERRED PLAY(MCS)
F7H
EOX
(End Of Exclusive)
LOCATE (MCP)
FORMAT2 - LOCATE[TARGET]
status
data byte
F0H
7FH, dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC Command Message
44H
LOCATE[TARGET]
06H
Byte count
01H
"TARGET" sub-Command
hrH
Standard Time Specification with subframes (type{ff})
mnH
scH
frH
ffH
F7H
EOX
(End Of Exclusive)
5. Parameter address map
1. XP-60/XP-80 (Model ID=6AH)
Note:
For addresses marked by a #, the data must be divided into 2 parts
for transmission. For example, data with the hexadecimal value ABH
would be divided into 0AH and 0BH, and transmitted in that order.
Note:
Parameter values enclosed in < > are for the JV-1080, and will be
ignored if received by the XP-60/XP-80.
+-----------------------------------------------------------------------------+
| Start
|
|
Address |
|-------------+---------------------------------------------------------------|
| 00 00 00 00 | System
| 01 00 00 00 | Temporary Performance
| 02 00 00 00 | Performance Mode Temporary Patch (part 1)
| 02 01 00 00 | Performance Mode Temporary Patch (part 2)
|
:
|
:
| 02 08 00 00 | Performance Mode Temporary Patch (part 9)
| 02 09 00 00 | Temporary Rhythm Setup
| 02 0A 00 00 | Performance Mode Temporary Patch (part 11)
|
:
|
:
| 02 0F 00 00 | Performance Mode Temporary Patch (part 16)
| 03 00 00 00 | Patch Mode Temporary Patch
| 10 00 00 00 | User Performance USER:01
| 10 01 00 00 | User Performance USER:02
|
:
|
:
| 10 1F 00 00 | User Performance USER:32
| 10 40 00 00 | User Rhythm Setup USER:1
| 10 41 00 00 | User Rhythm Setup USER:2
| 11 00 00 00 | User Patch USER:001
| 11 01 00 00 | User Patch USER:002
|
:
|
:
| 11 7F 00 00 | User Patch USER:128
+-----------------------------------------------------------------------------+
1-1.System
+-----------------------------------------------------------------------------+
| Offset
|
|
Address |
|-------------+---------------------------------------------------------------|
|
00 00 | System Common
|
10 00 | Part 1 Scale Tune
|
11 00 | Part 2 Scale Tune
|
:
|
:
|
1F 00 | Part 16 Scale Tune
|
20 00 | Patch Mode Scale Tune
+-----------------------------------------------------------------------------+
status
F7H
Description
Description
status
F7H
|
|
1-1
|
1-2
|
1-3
|
|
|
|
1-4
|
1-3
|
|
|
1-3
|
1-2
|
|
|
|
1-4
|
|
1-3
|
|
|
|
|
|
1-1-1 |
1-1-2 |
|
|
|
1-1-2 |
221