Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 116

3 Download the latest version of the Cintel Scanner software from the
Blackmagic Design website, install it on your computer and run it. The Cintel
Setup utility will detect your computer is plugged into your Cintel Scanner's
USB recovery port. Click 'update now'.
Cintel Scanner software will detect your computer
is plugged into Cintel's USB recovery port
4 After the update recovery is complete, your Cintel Scanner should now be running
the latest software and operating normally. You can check this by disconnecting the
USB cable, connecting the thunderbolt cable, and then power cycling your scanner.
5 Replace the rear panel and reinstall your Cintel Scanner into position for normal
operation. If you need further assistance, you can always visit the Blackmagic Design
forum, or reach us via the Blackmagic Design support center.
Help 116