Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 16

4 Loading Film
Load your film reel or core onto the feeder spindle following the same procedure in
step 3. Note that the procedure differs slightly depending on whether your film is on
a core or a reel, and whether it is 35 or 16mm. For example, when loading a core, you'll
need to insert the provided backing plate, whereas loading a reel only requires the
use of spacers.
When loading film reels, the backing plate is not required and you can simply use the
spacers provided. When loading film on a core, the supplied backing plate is required.
5 Lacing Film
Gently lace several feet of the film leader through your scanner's rollers using the
following illustration as a guide.
Your scanner's default B/A wind loads from the bottom of
the feeding spool and onto the top of the taking spool.
Getting Started 16