Getting Started; First-Time Setup - Ambu aView 2 Advance Instrucciones De Uso

Symbol Description
Catalogue number
Universal Serial Bus (USB)
3G-SDI
Serial Digital Interface
Batch Code
%
Humidity limitation
US Federal Law restricts
Rx only
this device to use by or on
the order of a physician
Japan Radio Law
TELEC RF certification
Taiwan Radio Requirement NCC certification

4. Getting started

4.1. First-time setup

Follow the steps below before using the displaying unit for the first time. Letters in grey circles
refer to the illustrations in the Quick Guide on page 2.
1. Unpack the displaying unit and verify that no parts are missing. Refer to the parts
described in chapter 2.
2. Closely examine the displaying unit and other parts for any damage. Do not use the
displaying unit if it is damaged in any way A .
3. Connect the power supply to a power outlet and insert the power plug into the power
inlet on the back of the displaying unit E .
4. Turn ON the displaying unit by short pressing the power button. The indicator light in the
power button switches from orange (STANDBY mode) to green (ON) D . A live image is
available soon after the monitor is turned on if a visualization device is connected. If no
visualization device is connected, the interface will illustrate how to correctly connect a
visualization device to the displaying unit.
5. Go to Appendix 3. Cybersecurity and ensure that the use of the displaying unit's software
and connectivity is aligned with your organization's policies.
6. Select the preferred language, then press Continue 1 .
7. Select your country, then press Continue 2 . Press Confirm 3 .
IMPORTANT: Selecting the correct country from the first time is a requirement for regulatory
compliance, and the selected country cannot subsequently be changed by any users of the displaying unit.
If selection of a new country is necessary, please contact your local Ambu representative. The displaying
unit's language can be changed by the Administrator at any time.
Symbol Description
Waste Bin symbol,
indicating that waste must
be collected according to
local regulation and
collection schemes for
disposal of batteries
High-Definition
HDMI
Multimedia Interface
LAN
Local Area Network
Medical Device
Atmospheric
pressure limitation
CE marking with
identification number
of the notified body
Australia and New
Zealand's Regulatory
Compliance Mark
11