Connect External Equipment; Connecting To An External Monitor; Connecting Usb Flash Drives; Connecting An Audio Device - Ambu aView 2 Advance Instrucciones De Uso

Delete files permanently:
• Press the Archive tab, then press Bin.
• Press the required folder.
• Select the required files by ticking the boxes below the thumbnails, or press Select all.
• Press the permanently delete icon 21 , then press OK.

8. Connect external equipment

See the overview of input and output connections in section 2.3. Please consult the
Instructions for Use of the external equipment for further information. Ensure that the
displaying unit is in STANDBY mode (orange light in power button), turned OFF or
disconnected (no light in power button) when connecting the equipment.

8.1. Connecting to an external monitor

Live image or playback video shown on the displaying unit's screen can be shown
simultaneously on an external monitor via cable connection (3G-SDI or HDMI). The image
on the external monitor is the mirror image of the displaying unit's screen, including the
software interface.
Use a medical grade monitor with resolution of at least 1920 x 1080, 60 frames per second (fps)
and a monitor size of at least 27" with HDMI and/or 3G-SDI input. The recommended colour
space is sRGB.
Connect the displaying unit to an external monitor:
• Connect the 3G-SDI or HDMI cable from the external monitor to the connector port on
the back of the displaying unit (see section 2.3).
• Ensure that the correct input setting has been selected on the external monitor (please refer
to the instructions for use supplied with the external monitor).
Note: It is advised to connect the external monitor while the displaying unit is turned off.
Note: Automatic image rotation is not supported with a HDMI connected external monitor. Please change
orientation of the displaying unit to correct the HDMI monitor view.

8.2. Connecting USB flash drives

If needed, connect an external USB flash drive to the USB ports on the side of the displaying
unit (see section 2.4. at 9-1 for USB port locations).

8.3. Connecting an audio device

8.3.1. Record sound during the procedure
• Connect the displaying unit to an audio device via USB connection (see section 2.4. at 9-1).
• A microphone icon in the Toolbar indicates if the audio device is compatible or not.
8.3.2. Play sound recorded during a procedure
• Connect an audio device to the displaying unit's USB connector port to listen to audio during
video playback.
Note: Video files that contain audio recording are shown with an audio icon.
30
19
18
20 21