Operating The Displaying Unit; Preparation And Inspection Of The Displaying Unit Before Use - Ambu aView 2 Advance Instrucciones De Uso

• Press Test worklist connection 37 to verify that the information has been entered correctly
and the server connection can be established.
Import TLS certificate from server or USB flash drive:
You can use TLS for enhanced security when setting up PACS and Worklist server connections.
Enabling TLS requires a TLS certificate to be imported to the displaying unit from a server or
from a USB flash drive. If multiple TLS certificates are imported to the displaying unit, the
PACS/Worklist server will select the required TLS certificate automatically. For import from
server, ensure that the displaying unit is connected to a Wi-Fi or LAN network (see section 5.1.).
For import from USB flash drive, ensure that USB connection has been enabled for certificate
import and a USB flash drive connected to the displaying unit (see section 4.3.).
To import TLS certificates from a server:
• Press Server import 38 .
• Press the input field next to Certificate file
name 39 and enter the file name.
• Press the input field next to Host name 40 ,
and enter the hostname.
• Press the input field next to Port number
41 and enter the port number.
• Press Import 42 .
To import TLS certificates from a USB flash drive:
• Press USB import and wait while the displaying unit searches for TLS certificates on the USB
flash drive.
• Select the required TLS certificate and press Import 43 .
Note: When the TLS certificate has been imported, the name of the certificate file is shown below Imported
TLS certificates.
Server information
PACS name
PACS AE Title/
Worklist server AE title
Host name/
Worklist server hostname
Port number/
Worklist server port number

6. Operating the displaying unit

6.1. Preparation and inspection of the displaying unit before use

Before using the displaying unit for a patient procedure, follow the relevant steps below and
any other necessary steps according to your organization's procedures and requirements for
preparation and inspection of this type of device.
20
42
Explanation
The name entered here is the one shown on the list of
available servers in the Export menu.
The title entered here is used by the server to identify the
displaying unit's individual software application.
IP-address, MAC address or full web address for the server.
Network port number for the server.
39
40
41
43