TDK relyon plasma piezo brush PZ3-i Manual De Instrucciones página 12

2.4 Assignment of connecting lines
The DC connecting line must be assigned as follows:
The communication connecting line must be assigned as follows:
12
# Colour
1 brown
3 blue
4 black
# Colour Signal during
digital I/O
communication
1 brown Plasma on (input 0 to
10 V analogue, up to
24 V voltage-proof, min.
2.4 mA per device)
2 white Plasma OK
(output 0 V / 24 V
at max. 20 mA)
3 blue Error (output 0 V /
24 V at max.
20 mA)
4 black -not used-
5 grey GND
6 pink -not used-
Signal
24 V DC (V+)
GND (V-)
Not assigned
Signal during
CANopen
communication
-not used-
-not used-
-not used-
CAN high
GND
CAN low
BA-PZ3_i_ML / F0354902