TDK relyon plasma piezo brush PZ3-i Manual De Instrucciones página 9

2 Description of the device
2.1 Intended use
The device is an integration unit for generation of what is known as a 'cold' discharge,
hereafter referred to as 'plasma'. It is intended to be mounted in stationary devices or in
positioning units and is used for pre-treating various material surfaces prior to process
steps such as adhering or printing. The cleaning effect of the plasma can also be utilised.
Only use the device for the intended purposes. Failure to do so may restrict product
liability.
2.2 Scope of delivery
PiezoBrush PZ3-i integration unit (1000 7000 01)
The scope of delivery includes the following components:
• Plasma generator/integration unit
(consisting of a driver unit and a module carrier)
• Connecting line between driver unit and module carrier (length 0.3 m)
• Assembly screws (2 units M3x30; 1 unit M3x6)
• Operating instructions
Not included:
• Power unit / voltage supply
• DC connecting lines and communication
• Exchange module
BA-PZ3_i_ML / F0354902 9