SPIDER MAX 500
The parameters are calculated according to the following table:
Function
Digits
Maximum
3 Digits
speed
Mean
4 digits
Speed
Trip
4 digits
time
(hh:mm)
Distance
5 digits
covered
Information can be reset according to the following procedures:
• Distance covered overflow: after 99h59' the system automatically deletes all the Trip memory function data.
• Covered distance overflow: after 9999.9 Km (or 9999.9 Mi), the system automatically deletes all the Trip memory
function data.
• Extended Sleep Mode: if the key switch remains on the "OFF" position for more than 2 hours, the system automatically
deletes all the Trip memory function data.
• Manual Reset: the user can reset all the Trip memory function data in any moment by pressing, for at least 2 seconds,
the Mode button (beside the Trip memory function).
All the counters associated with the trip memory are saved in a volatile memory.
1.4
Preventive Maintenance Function (Service)
When selected, the preventive maintenance indicator displays the distance
to be covered (decreasing counter) before the warning messages concerning
OIL and V.BELT (F. 4) are displayed. More precisely, it indicates when it will
be necessary to refer to an authorised service centre for OIL CHECK/
CHANGE or V. BELT CHANGE. When both the indicators associated with
these two alarms display 0000, the corresponding warning message turns
on and the counter stops being updated (it will continue indicating 0000),
until the operation required is performed.
OIL and V. BELT Service follows the parameters described below:
I coupon
Distance
Oil
After 1000
Change
Km
V. Belt
Every 12000 Km a message prompting to replace the transmission belt to the converter
("Change" type alarm) is displayed.
• The displayed information cannot be changed in any way.
• The information is expressed in Km or Miles.
• The value is stored in a non-volatile memory.
All manuals and user guides at all-guides.com
Resolution
1 Km/h
180 Km/h - 111 Mph
1 Mph
0.1 Km/h
180 Km/h - 111 Mph
0.1 Mph
1 minute
0.1 Km
9999.9 Km - 9999.9 Mi
0.1 Mi
II coupon
Type
Distance
Type
After 2000 Check
Km from the
first one
8
Maximum value
99 hours 59min
0.1 Km - 0.1 Mi
F. 4 Trip memory
III coupon
Distance
Type
After 3000
Km from the
Change
second one
change
12/04
A
Refresh
Icon
5000 m/sec
MAX
100m se v>0
MEAN
5 sec se v=0
Clock
1 minute
icon
-
Following
Alternate Check
and Change
every 3000 Km