Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 190

SPIDER MAX 500
Check for the pump winding resistance: ≥ ≥ ≥ ≥ ≥ 1,5 Ω Ω Ω Ω Ω (see p. 72).
Replace the fuse and check for
the pump operation.
Select the diagnostic multimeter menu from the "ACTIVE DIAGNOSTICS" function. Select the
"fuel pump simulation" function. Enable the function with the dashboard supply function on and
the engine not running.
The multimeter prompts the central unit to enable the pump for 30 seconds.
The pump is receiving supply.
Check the pump operation
(see p. 65).
All manuals and user guides at all-guides.com
Parameters
Immobilizer
Errors
Delete errors
Active diagnostics
CO calibration
Main 5/8
Make sure the sound of the following operation can be heard:
- relay closing
- pump rotation
- relay opening
64 12/04
Check the power consump-
tion (see page 72).
Fuel pump relay
H.T. coil
Stepper motor
Rev. counter
Injector
Relay fan
Diagnostic check 1/6
Check the connector to the pump support.
Replace the pump
(see p. 73)
B
Carrying out
diagnostic check
Please wait
Fuel pump relay
Restore