Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If you experience an issue with your range, review the tables in this section to resolve
it. If you cannot find a solution, call Dacor Customer Assurance 833-353-5483(USA),
844-509-4659(Canada) for assistance.
Gas Safety
Problem
You smell gas.
Surface Burner
Problem
No burners light
Burner does not
light
Burner clicks
during operation
Burner not burning
evenly
Very large or
yellow burner
flames
94
English
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 94
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 94
Possible cause
Burner is ON, but burner is
not lit.
Gas leak.
Possible causes
Cooktop is unplugged.
Blown fuse/tripped circuit
breaker.
Gas supply not on or
improperly connected.
Control knob not set
properly.
Burner caps not in place or
burner base misaligned.
Control knob in flame
position.
Burner improperly
assembled.
Dirty burners.
Wrong burner orifice
installed.
Action
Turn the burner knob to OFF.
• Evacuate the building.
• From a neighbor's home (your phone
may cause a spark that ignites
the gas), immediately call the gas
supplier, and follow their directions.
(If you cannot reach your gas
supplier, call the fire department.)
Action
Ensure power cord is plugged into a
live, grounded outlet.
Replace fuse/reset circuit breaker.
See the Installation Instructions.
Push in knob and turn to flame symbol
position.
•
Clean the electrodes.
•
Put burner cap on burner head.
•
Align burner base.
After burner ignites, turn knob to
desired setting; if burner still clicks,
contact service technician.
See Pg. 85.
Clean the burner components, see
Pg. 82.
Check burner orifice size; if you have
wrong orifice (LP gas instead of natural
gas), call service technician.
2023-02-23 오후 5:22:32
2023-02-23 오후 5:22:32
Publicidad
