Astoria STORM 4000 SAEP 2GR Manual De Uso Y Mantenimiento página 56

Dispensing steam
7.7
Immerse the steam nozzle into
the liquid to be heated;
lower the tap lever;
to end the delivery, bring the
lever upwards.
Avoid contact with the steam nozzles, do not place your hands or
other body parts near the steam nozzle tips.
To optimally froth the milk, follow these simple rules:
Only heat the amount of milk that you intend to use;
once heated, it will have to be completely poured out
of the jug and cannot be reheated;
Froth the milk which should be at a temperature of
around 4°C.
To keep the steam nozzle tips in perfect working order, it is
advisable to carry out a brief dry dispensing run after each use.
Keep the tips clean at all times using a cloth dampened in
lukewarm water.
The condensation draining operation must be carried out for
at least 2 seconds before using the steam
nozzle.
Only leave the steam wand immersed in the
milk for the time needed to heat it.
Do not open the steam valve with the steam
wand immersed in milk while the machine
is switched off.
56 260
of
Dispensing hot water
7.8
Place the pot under the hot
water spout;
Select the
display and wait for the hot
water to be dispensed;
To stop the hot water dispens-
ing ahead of time, press the
Avoid contact with the hot water nozzle,
do not place your hands or other body
parts near the hot water nozzle tips.
The machine is programmed by default. If you would like to modify
the doses, proceed as indicated in para. 7.12.1 on page 59.
MILK
button on the
button again.
USER Manual