Astoria STORM 4000 SAEP 2GR Manual De Uso Y Mantenimiento página 59

Programming the machine parameters
7.12
7.12.1 BEVERAGE DOSE programming
To programme coffee and hot water doses, proceed
as follows:
Select the button ;
Press the menu button
Select the configuration button
Press the dose programme button
Select the desired dose button (e.g. "1 espresso"
);
Press the button to start dispensing;
Start
To confirm and stop the dose, press the
Repeat this operation for the other dose buttons;
To check the dose, press the "Test the dose" button
.
Start
You can copy the dose settings on to the other groups
by pressing the
To delete the dose settings, press the
The dose can be manually adjusted via the
buttons.
you can also change the coffee pre-infusion time
by pressing the icon
and keys (or with the numeric keypad
) modify the selected parameter and confirm with
the key.
ok
Do not remove the filter holder from the dispensing group when
coffee is being dispensed.
Each dose must be programmed with ground coffee and not with
previously-used coffee grounds.
SINGLE EXTRACTION CURVE
Single group
preinfusion
time 1
USER Manual
;
;
Programme doses
button;
Stop
button;
button;
: Acting with the
PRE-INFUSION
TIME
Programmable
pre-infusion time
Pre-infusion
time
0 5 20 s
0 10 60
;
and
programme doses
date and time
screensaver
PROGRAMME DOSES
Select the dose to be programmed
PROGRAMME DOSES
PRE-INFUSION
TIME
0.0"
DETAILED
ADJUSTMENT
USER MENU
last dispensed
parameter
beverage
washes blend selection
counter water filters
Start/End dispensing dose
simulated programming
PROGRAMME
Start
DOSES
stop
programmed dose
Start
TEST THE DOSE
stop
Copies the dose on
COPY TO ALL
GROUPS
DOSE RESET
configuration
Manual dose adjust-
Check the
all groups
Delete dose
ment (ml)
59 260
of