Blodgett SG3240 Serie Manual Del Operario página 34

Maintenance
Cleaning
12. Clean oven components as follows:
--- Clean the conveyor, crumb pans, nozzles,
nozzle support bar, conveyor support
angles and the air plate with a hot
water/detergent mix. Rinse with clean
water. For difficult cleaning use a heavy duty
degreaser or oven cleaner that is safe for
aluminum.
--- Clean the oven interior with an all purpose
cleaner or an oven cleaner that is safe for
aluminum.
13. Reassemble the oven. Be sure the nozzles are
installed in the correct order. See Figure 23.
NOTE: The closed front end of the nozzles are
marked with the nozzle part number.
( may be removed as one piece --- disassembled here for clarity)
M8862
M8862
M8862
M8862
Standard Conveyor Assembly
M8863
M8863
M8863
M8863
EVERY 12 MONTHS:
A factory authorized service person should:
1. Open and clean the inside of the control box.
2. Check and tighten all electrical connections.
3. Check conveyor drive chain for cleanliness,
proper lubrication and alignment.
If maintenance is required contact your local ser-
vice company, a factory representative or the
Blodgett Oven company.
See View A
Figure 23
32
2 holes
1 hole
M8862 M8863
Nozzle Identification
from front of nozzles
View A