Description Of Controls And Instruments - ANTEO REP Serie Uso Y Mantenimiento

DESCRIPTION OF CONTROLS AND INSTRUMENTS

Ref. Description
on the console in the vehicle cab (fig. 1
C1
Control cir cuit switch
C2
Pilot lights platform not in rest position
on the main con sole (fig. 2)
C3 Key-operated switch
C4
Selector switch enabling the auxiliary controls/
console controls
C5
Platform movement lever
(it is enabled only if C4 is turned to the right)
A Fuse box
B
Green pilot light "POWER ON"
C
Socket for connection of the emergency
control (optional).
on the selection button panel (fig. 3)
68
DESCRIPTION OF CONTROLS AND INSTRUMENTS
Ref. Description
on the console in the vehicle cab (fig. 1
C1
Control cir cuit switch
C2
Pilot lights platform not in rest position
on the main con sole (fig. 2)
C3
Key-operated switch
C4 Selector switch enabling the auxiliary controls/
console controls
C5
Platform movement lever
(it is enabled only if C4 is turned to the right)
A
Fuse box
B Green pilot light "POWER ON"
C
Socket for connection of the emergency
control (optional).
on the selection button panel (fig. 3)
68
En
Emploi/Fonction
it con nects/dis con nects the con trol cir cuit of the Tail-lift (and the pilot lights (a) turn on) (Optional)
when they are on they indicate, the plat form is not at rest (Optional
it con nects/dis con nects the power supp ly of the Tail-lift
- when turned to the left it enables auxiliary controls - remote control, radio control or ultra-flat push-button panel according to
the symbol on the plate.
- turned right, enables control (C5) (it must be kept turned right to enable such control)
- if in central position, no control is enabled
- when it is actuated to the left, the plat form rotates downwards (only for REP..../4)
- when it is actuated to the right, the plat form rotates up wards (only for REP..../4)
- when it is actuated downwards, the plat form lowers
- when it is actuated upwards, the plat form lifts
it con tains the fuse in stalled in order to protect the electric sys tem. Fuse 15 A Ø 5x 22
on when voltage is live [(C3) in pos. ON] and the temperature value of the electric motor is normal. A thermal probe detects
the electric motor overheating and cuts off its power supply. Such condition is signalled when the pilot light turns off.
this socket is for connection of the emergency control and ONLY for CLOSING the tail lift if the main console fails.
En
Emploi/Fonction
it con nects/dis con nects the con trol cir cuit of the Tail-lift (and the pilot lights (a) turn on) (Optional)
when they are on they indicate, the plat form is not at rest (Optional
it con nects/dis con nects the power supp ly of the Tail-lift
- when turned to the left it enables auxiliary controls - remote control, radio control or ultra-flat push-button panel according to
the symbol on the plate.
- turned right, enables control (C5) (it must be kept turned right to enable such control)
- if in central position, no control is enabled
- when it is actuated to the left, the plat form rotates downwards (only for REP..../4)
- when it is actuated to the right, the plat form rotates up wards (only for REP..../4)
- when it is actuated downwards, the plat form lowers
- when it is actuated upwards, the plat form lifts
it con tains the fuse in stalled in order to protect the electric sys tem. Fuse 15 A Ø 5x 22
on when voltage is live [(C3) in pos. ON] and the temperature value of the electric motor is normal. A thermal probe
detects the electric motor overheating and cuts off its power supply. Such condition is signalled when the pilot light
turns off.
this socket is for connection of the emergency control and ONLY for CLOSING the tail lift if the main console fails.