ANTEO REP Serie Uso Y Mantenimiento página 80

Ref. Description
on the plat form (optional) (fig. 8)
C8 Platform lift ing push-but ton
C9
Platform lower ing push-but ton
C10
Enabling push-but ton
on the button panel of the two function remote control (emergency control) (fig. 2)
C11 Platform lift ing push-but ton
C12
Platform lower ing push-but ton
on the button panel of the two function radio control (fig. 3)
C11 Platform lifting button
C12 Platform lowering button
C13
Switch on push-button
C14
Switch off push-button
A Signalling led
The transmitter monitors battery charge level indicating when the battery is down and need to be replaced.
At switching on the radio control monitors the battery and, if necessary, indicates that it is down by means of a series of rapid audible alarms. It is possible to go on operating for a few
time, although it is advisable to replace the battery.
NOTE: all the auxiliary controls described above are enabled only with the controls (C4-C4') rotated to the position corresponding to the controls intended to be used.
NOTE : the connection socket (if present) for the emergency control is positioned to the side of the main console.
76
Ref. Description
on the plat form (optional) (fig. 8)
C8 Platform lift ing push-but ton
C9 Platform lower ing push-but ton
C10
Enabling push-but ton
on the button panel of the two function remote control (emergency control) (fig. 2)
C11 Platform lift ing push-but ton
C12 Platform lower ing push-but ton
on the button panel of the two function radio control (fig. 3)
C11 Platform lifting button
C12 Platform lowering button
C13 Switch on push-button
C14
Switch off push-button
A
Signalling led
The transmitter monitors battery charge level indicating when the battery is down and need to be replaced.
At switching on the radio control monitors the battery and, if necessary, indicates that it is down by means of a series of rapid audible alarms. It is possible to go on operating for a few
time, although it is advisable to replace the battery.
NOTE: all the auxiliary controls described above are enabled only with the controls (C4-C4') rotated to the position corresponding to the controls intended to be used.
NOTE : the connection socket (if present) for the emergency control is positioned to the side of the main console.
76
En
Use/Function
if pressed the plat form lifts [enabled only if (C10) is pressed]
if pressed, the plat form lowers [enabled only if (C10) is pressed]
if pressed (C8) and (C9) are enabled
if pressed, the plat form lifts
if pressed, the plat forms lowers
press it to lift the platform
press it to lower the platform
hold it to turn the remote control on; turning on is indicated by a long beep
press it to interrupt any function; it has priority over any other button, the stop command is executed even though other functions are
activated. This function is indicated by the radio control by means of short audible alarms.
on when replacing batteries or pressing the switch on button (C15); blinking when the transmitter is online. If it does not turn on,
replace the radio control battery
En
Use/Function
if pressed the plat form lifts [enabled only if (C10) is pressed]
if pressed, the plat form lowers [enabled only if (C10) is pressed]
if pressed (C8) and (C9) are enabled
if pressed, the plat form lifts
if pressed, the plat forms lowers
press it to lift the platform
press it to lower the platform
hold it to turn the remote control on; turning on is indicated by a long beep
press it to interrupt any function; it has priority over any other button, the stop command is executed even though other functions are
activated. This function is indicated by the radio control by means of short audible alarms.
on when replacing batteries or pressing the switch on button (C15); blinking when the transmitter is online. If it does not turn on,
replace the radio control battery