ANTEO REP Serie Uso Y Mantenimiento página 88

Ref. Description
onthe four-function hand-held control keypad (emergency control) (fig. 1) -ONLY FOR REP.. /4
C21
Lifting/upward rotation push-button
C22
Lowering/downward rotation push-button
C23
Platform rotation push-button
on the four-function radio remote controlkeypad (fig. 2) -ONLY FOR REP.. /4
C11, C12, C13, C14, A have the same functions as those described for the two-function push-button panel (see earlier)
C17, C18 Pressing these platform rotation keys
C19, C20 Pressing these platform rotation keys
on the ultra flat push-button panel
C21 Lifting/upward rotation push-button
C22 Lowering/downward rotation push-button
C23 Platform rotation push-button
The transmitter monitors battery charge level indicating when the battery is down and need to be replaced.
At switching on the radio control monitors the battery and, if necessary, indicates that it is down by means of a series of rapid audible alarms. It is possible to go on operating for a
few time, although it is advisable to replace the battery.
NOTE: all the above-mentioned controls, if auxiliary to the console, are enabled only when C4 is set in the left-hand position corresponding to the push-button control panel
to be used.
NOTE: the connection socket (if present) for the emergency control is positioned to the side of the main console.
(*) Remember that the "rotation" controls are present ONLY on the REP..../4 tail–lifts and are enabled ONLY if the button panel is placed in its housing
84
Ref. Description
onthe four-function hand-held control keypad (emergency control) (fig. 1) -ONLY FOR REP.. /4
C21
Lifting/upward rotation push-button
C22
Lowering/downward rotation push-button
C23
Platform rotation push-button
on the four-function radio remote controlkeypad (fig. 2) -ONLY FOR REP.. /4
C11, C12, C13, C14, A have the same functions as those described for the two-function push-button panel (see earlier)
C17, C18 Pressing these platform rotation keys
C19, C20 Pressing these platform rotation keys
on the ultra flat push-button panel
C21
Lifting/upward rotation push-button
C22 Lowering/downward rotation push-button
C23
Platform rotation push-button
The transmitter monitors battery charge level indicating when the battery is down and need to be replaced.
At switching on the radio control monitors the battery and, if necessary, indicates that it is down by means of a series of rapid audible alarms. It is possible to go on operating for a
few time, although it is advisable to replace the battery.
NOTE: all the above-mentioned controls, if auxiliary to the console, are enabled only when C4 is set in the left-hand position corresponding to the push-button control panel
to be used.
NOTE: the connection socket (if present) for the emergency control is positioned to the side of the main console.
(*) Remember that the "rotation" controls are present ONLY on the REP..../4 tail–lifts and are enabled ONLY if the button panel is placed in its housing
84
En
Use/Function
by operating it, the platform is lifted
by operating it and pressing the (C23) push-button, the platform rotates upwards (only for REP..../4)
by operating it, the platform is lowered
by operating it and pressing the (C23) push-button, the platform rotates downwards (only for REP..../4)
by pressing it, the function of (C21) and (C22) push-buttons is commutated from movement to rotation (only for REP..../4)
at the same time rotates the platform downwards
at the same time rotates the platform upwards
by operating it, the platform is lifted
by operating it and pressing the (C23) push-button, the platform rotates upwards (only for REP..../4)
by operating it, the platform is lowered
by operating it and pressing the (C23) push-button, the platform rotates downwards (only for REP..../4)
by pressing it, the function of (C21) and (C22) push-buttons is commutated from movement to rotation (only for REP..../4)
En
Use/Function
by operating it, the platform is lifted
by operating it and pressing the (C23) push-button, the platform rotates upwards (only for REP..../4)
by operating it, the platform is lowered
by operating it and pressing the (C23) push-button, the platform rotates downwards (only for REP..../4)
by pressing it, the function of (C21) and (C22) push-buttons is commutated from movement to rotation (only for REP..../4)
at the same time rotates the platform downwards
at the same time rotates the platform upwards
by operating it, the platform is lifted
by operating it and pressing the (C23) push-button, the platform rotates upwards (only for REP..../4)
by operating it, the platform is lowered
by operating it and pressing the (C23) push-button, the platform rotates downwards (only for REP..../4)
by pressing it, the function of (C21) and (C22) push-buttons is commutated from movement to rotation (only for REP..../4)