Centre Stop; Bench Top Edge Distance - Hettich BlueMax Mini Modular Instrucciones De Servicio

Centre stop

Centre stop

is used for installing connecting fittings or
1
as the first stop for the hole line. Depending on working
direction, flip up the right or left-hand stop lever.
To adjust, undo knurled thumb screws
stop by hand.
Re-tighten knurled thumb screws after completing
adjustment.

8. Bench top edge distance

To set the bench top in relation to the interchangeable
drilling unit (spacing from edge), use the scale (manually)
or drum stops.
Undo screws with an Allen key and move bench
3
the appropriate direction (forwards or backwards).
Setting by scale
The bench can be positioned at the required setting
using scale .
5
Re-tighten screws after completing this work.
, and position centre
2
in
4
2 1
3 4
5
2
143
en