Malfunctions During Operation; Troubleshooting; Checks During Operations; Checks For Proper Working Order - Hettich BlueMax Mini Modular Instrucciones De Servicio

• Press pushbutton .
5
• Hold-down clamps are raised and you can remove panel.
This concludes the work operation.

3. Malfunctions during operation

All work involved in repairing, setting, troubleshooting and
servicing must only be carried out by duly instructed, trained
and authorised skilled personnel.

Malfunctions during operation

Immediately switch OFF the power supply to the machine if:
• unusual operating noises can be heard,
• the machine runs irregularly, oscillates or vibrates,
• faulty components get stuck,
• auxiliary units malfunction, and
• electrical faults occur
Note!
Always consult skilled personnel in the event of any
malfunction.

Troubleshooting

• Inform line manager / machine setter.
• Remove components still in the machine.
Caution!
First rectify the malfunction and / or eliminate its
cause before you switch the machine back ON again
and resume operation.
4. Checks during operation
The operator must watch over machine operation.
• For your own personal safety and absolute machine
operating safety, carry out the stated visual and safety
checks once or twice per day / shift.
In extreme operating or ambient conditions, increase the
number of checks per shift.

Checks for proper working order

• Is the machine running smoothly and with little vibration?
• Constantly watch out for any changes and operating
noises.
5
en
153