Malfunctions / Troubleshooting; General Information; Malfunctions Caused By The Owner; Troubleshooting General Causes Of Malfunction Malfunctions While Machine Is Operating - Hettich BlueMax Mini Modular Instrucciones De Servicio

Malfunctions / troubleshooting

10. Malfunctions / troubleshooting

1. General information

2. Malfunctions caused by the owner

3. Troubleshooting
General causes of malfunction
Malfunctions while machine is operating

4. Reporting malfunctions

1. General information
Note!
Always first identify the cause of any malfunction.
2. Malfunctions caused by the owner
Before leaving the factory, the machine/system was checked
for proper working order by our skilled personnel.
Malfunctions attributable improper treatment, non-intended
use or poor (unpunctual / improper) servicing are not covered
by the warranty. The risk is borne solely by the owner.
3. Troubleshooting
Caution!
Observe the regulations, warnings and precautions
when carrying out any troubleshooting activity
When locating any fault, proceed in stages and make a
written note of observations, testing or measuring results.
Try and establish as accurately as possible which operating
situation the malfunction occurred in, in other words try to
answer the following questions:
Which work operation was the machine still performing
properly?
After which work operation did the malfunction start to
occur?
Does the malfunction occur regularly or only occasionally?
In the case of occasional malfunctions, try to find out
whether the malfunction can be associated with
events or actions immediately before the malfunction occurs.
Does the malfunction only occur in conjunction with specific
components (material, shape, particular profiles)?
Observe the operating manuals for all additional equipment /
options.
General causes of malfunction
Before removing components in any troubleshooting activity,
first make sure:
157
• the machine and / or its equipment is not showing any
157
visible damage,
157
• the machine is clean and no dust deposits are obstructing
or affecting the way components move,
157
• the compressed-air supply is working properly and
157
operating pressure is within the permissible tolerance
157
(6 - 7 bar),
• the mains power supply conditions match the
specifications for the electric motors (rating plates) and /
or electric equipment, and motor protection is correctly set,
and
• servicing measures have been performed on time.
Malfunctions while machine is operating
All work involved in repairing, setting, troubleshooting and
servicing must only be carried out by duly instructed, trained
and authorised skilled personnel.
Always consult the machine setter in the event of any
malfunction.
Try and locate the area of the machine the malfunction has
occurred in.
Check whether:
• switches are incorrectly set or faulty,
• air hoses are leaking or kinked, and
• electric cables have been damaged by the switches or
solenoid valves. It is not uncommon for electric cables to
break.
4. Reporting malfunctions
If the information given above does not help you to remedy
a problem, please contact Paul Hettich GmbH & Co. KG by
telephone.
Please remember, though, that we too can only give swift
assistance if we are provided with detailed information and
fault descriptions.
en
157