Technical Service; Accessories/Spare Parts; Technical Data; Classification Acc. To Directive 93/42/Eec - Aesculap Acculan 4 Instrucciones De Manejo

Issue
Tool not moving
Oil spray adapter not
attachable

10. Technical Service

Danger to life of patients and users if the product
malfunctions and/or protective measures fail or are
not used!
WARNING
►
Do not perform any servicing or maintenance
work under any circumstances while the product
is being used on a patient.
►
Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
►
For service and repairs, please contact your national B. Braun/Aesculap
agency.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Other service addresses can be obtained from the address indicated above.

11. Accessories/Spare parts

Art. no. Designation
GB243R ECCOS set for 2 large machines
GB600 STERILIT Power Systems oil spray
GB600840 Oil spray adapter
TA011944 Cleaning brush
GB496R ECCOS fixation for 3 attachments
GB497R ECCOS fixation for one attachment
GA031R Key for large Jacobs chuck
GA062R Key for small Jacobs chuck
TA014541 Instructions for use for Acculan 4 attachments
(flyer)
Cause
Attachment not fully attached to
the drill
Tool not fully attached to the
attachment
Attachment defective
Drill defective
The safety catch of the drill is in
the OFF position
Oil spray adapter not compatible
Detection
Attachment can be pulled out of
the drill
Tool can be pulled out of the tool
coupling
Drill turning, but attachment is
not turning.
Drill not turning
Safety catch is in OFF position
Oil spray adapter not attachable

12. Technical data

12.1 Classification acc. to Directive 93/42/EEC

Art. no. Designation
GB176R Zimmer chuck with Hudson/Zimmer shaft
GB184R Harris chuck with AO large shaft
GB620R Drill attachment keyless Jacobs chuck
GB621R Drill attachment large Jacobs chuck
GB623R Drill attachment AO small
GB628R Adapter AO large to DHS/DCS step drill
GB639R Drill attachment small Jacobs chuck
GB641R Kirschner wire attachment
GB645R Drill attachment for Synthes radiolucent angle
transmission
GB657R Medullary reamer attachment AO large
GB660R Sagittal saw attachment
GB663R Drill attachment Trinkle
GB664R Drill attachment Aesculap hexagon
GB665R Drill attachment Hudson/Zimmer
GB667R Reamer attachment large Jacobs chuck
GB668R Reamer attachment AO large
GB669R Reamer attachment Hudson/Zimmer
GB670R Reamer attachment Harris
XF457R DIN chuck with AO large shaft

12.2 Performance data, information about standards

Rotational direction
Conforming to stan-
dard
The product was subject to 500 preparation cycles as a test by the manu-
facturer and has passed.
The performance data for the individual attachments can be found in the
table below.
Remedy
Correctly attach the attachment and perform a
function test.
Correctly attach the tool and perform a function
test.
Have the manufacturer repair the attachment.
Have the manufacturer repair the drill.
Turn the safety catch into the ON position.
Use the compatible oil spray adapter for GA344.
Right and left rotation, oscillation
IEC/DIN EN 60601-1
Class
IIa
13