Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 14

CONFIGURATION MENU
The configuration of the pump parameters should be completed during the initial setup.
DISPLAY BRIGHTNESS
Operator can adjust the brightness level of the pump display from 0% to 100%. There is some visibility
at the minimum setting.
NOTE: For best performance and longevity, the display brightness should not be set higher than 50% for extended periods.
NAVIGATION
Moves up in a menu, toggles
between options, or increase a value
Holding the or button causes the numbers to change rapidly.
Configuration
- Display Brightness
- Units
- Clock
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
Moves down in a menu, toggles
between options, or decreases a value
Display Brightness
100%
adjust
14
Moves one step back in
a menu, when permitted
Returns to Configuration menu
set
Sets a value in a menu