Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 62

OPERATING DISPLAY
PPM FEED, CONSTANT FLOW
NAVIGATION IN OPERATING MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no
PPM %
OFF
If unlocked or password not set.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
PPM
50.0
select
While the pump
receives a pulse, the
display will show a
closed contact
PPM
100
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
BACK
Cycles the display through
the units of output
%
Hold for 2 seconds
Metric is displayed if
selected in Configuration
%
Prime
62
ENTER
Press and hold for 2 seconds
to go to the Main Menu
Enter password if display is locked.
To Main Menu if unlocked.
PPM RPM
22
PPM GPD
20.0
PPM GPH
0.83
PPM oz/min
1.77