Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 57

OPERATING DISPLAY
0-10VDC
NAVIGATION IN OPERATING MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no select
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
0-10VDC VDC
10.0
0-10VDC
100
Prime
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
BACK
Cycles the display through
the units of output
Enter password if display is locked. To
Main Menu if unlocked.
Hold for 2 seconds
%
Metric is displayed if selected
in Configuration
57
ENTER
Press and hold for 2 seconds
to go to the Main Menu
0-10VDC %
100
0-10VDC RPM
45
0-10VDC GPD
40.0
0-10VDC GPH
1.66
0-10VDC oz/min
3.54