Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 20

CONFIGURATION MENU
TUBE TIMER
Operator can set the tube run time in hours, to initiate the tube change indicator. When the set time is
reached, the operating display shows Tube Change.
• After the tube is replaced, reset the current run time to zero.
NAVIGATION
Moves up in a menu, toggles
between options, or increase a value
Holding the or button causes the numbers to change rapidly.
Configuration
- Calibration
- Password
- Tube Timer
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
Moves down in a menu, toggles
between options, or decreases a value
Tube Timer
- Current Run Time
- Set Life Timer
- Reset Tube Timer
Tube Timer
- Current Run Tim
- Set Life Timer
- Reset Tube Timer
set back
Tube Timer
- Current Run Time
- Set Life Timer
- Reset Tube Timer
Tube Timer
- Set Life Timer
- Reset Tube Timer
- TO CONFIGURE MENU
To Configuration menu
Moves one step back in
a menu, when permitted
RUN TIME IS
X HOURS
To Tube Timer Menu
Time to tube change Time to tube change
_ _ _ 0 Hours 0000 Hours
adjust adjust set set
Setting the timer to zero
disables this feature
Reset Tube Timer?
Yes
yes/no select
Reset Tube Timer?
No
yes/no select
20
Sets a value in a menu
Displays current tube run time
and returns to Tube Timer Menu
when ENTER is pressed.
To Tube Timer menu
The timer is reset to zero.
Returns to Configuration menu
The timer is NOT reset.
To Tube Timer menu