Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 63

OPERATING DISPLAY
CYCLE TIMER
NAVIGATION IN OPERATING MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no select
CYCLE
OFF
If unlocked or
password not set.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
CYCLE
999
CYCLE
950.0
SEC
CYCLE
100
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
BACK
Cycles the display through
the units of output
Display counts down seconds to next run.
SEC
Display counts down seconds when running
SEC
Enter password if display is locked. To
Main Menu if unlocked.
Hold for 2 seconds
%
Prime
Metric is displayed if
selected in Configuration
63
ENTER
Press and hold for 2 seconds
to go to the Main Menu
CYCLE %
50
CYCLE RPM
22
CYCLE GPD
20.0
CYCLE GPH
0.83
CYCLE oz/min
1.77