Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 45

CONTROL MODES MENU
7 Day Timer
page 3 of 3
The timer utilizes a 24 hour format.
NAVIGATION
Moves up in a menu, toggles
between options, or increase a value
Holding the or button causes the numbers to change rapidly.
Continued from previous page
7 Day Timer
- Program Settings
- Enable Timers
- Go to Main Menu
After all desired timers are programmed, return to the 7 Day Timer and ENABLE the timers.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
Moves down in a menu, toggles
between options, or decreases a value
Select the days of the week the timer
For each day, select "OFF" to prevent
Select the timer to program.
timer from running and select "ON" to
Options are
#01 through #24.
Select Timer to Set
Timer # 01
adjust set back
45
Moves one step back in
a menu, when permitted
is to run. Any combination
of days is possible.
allow the timer to run.
Set days to Run
Sunday Off
adjust set
Enter the OFF time (stop
time) for the timer.
Enter the speed % the pump
is to run for the timed event.
Sets a value in a menu
Enter the ON time
(start time) for the timer.
Set ON Time
00:00:00
adjust set
Set OFF Time
00:00:20
adjust set
Set Pump Speed
100%
adjust set